Interior Products
ALEXSEAL manufacturers different interior products. Please read each section thoroughly and refer to the appropriate technical data sheets, as application recommendations for these different topcoats may vary.
ALEXSEAL Interior Primer
ALEXSEAL Interior Primer 178 is a two component epoxy based primer which is very fast drying. It can be overcoated quickly with ALEXSEAL N-Series Interior Topcoat 578 and is characterized by low odor. After final drying ALEXSEAL Interior Primer 178 is mechanically resistant and offers a good corrosion protection on all kinds of metal. It can be left without topcoat in areas, where aesthetic features are not required. ALEXSEAL Interior Primer 178 has been approved by IMO Resolution MSC.307 (88)-(FTP-Code 2010) as marine paint with low flame-spread characteristics.
ALEXSEAL Interior Primer 178 is used for corrosion protection and adhesion promotion on steel and aluminium substrates. After curing it offers a solid primer layer with good chemical and mechanical resistances.
ALEXSEAL Interior Topcoat
ALEXSEAL Interior Topcoat 578 is a two component, polyurethane based material used where an extremely durable long lasting coating is required. Good adhesion properties on a variety of substrates, combined with high resistance values make ALEXSEAL Interior Topcoat 578 suitable for many areas of application. The cured film is resistant to abrasion, scratching, solvents, chemicals, synthetic cooling agents and hydraulic oils. This coating is recommended for interior applications only. If objects exposed to extreme weather conditions are not cleaned regularly, UV rays will cause slight gloss and color changes. However, this does not affect the film’s protective properties.
ALEXSEAL Interior Topcoat 578 is used for parts in the engine room and the yacht’s interior and is available in standard factory packaged colors.
ALEXSEAL Waterborne Topcoat
ALEXSEAL Waterborne Topcoat is a water-reducible, two-component paint based on polyurethane technology. This is a low VOC (Volatile Organic Compound) coating that works well for interior areas. After curing, the material is characterized by high gloss retention and color resistance even under extreme climatic conditions. Moreover, the cured film is resistant to abrasion, scratching, solvents, chemicals, synthetic cooling agents and hydraulic oils. ALEXSEAL Waterborne Topcoat is used in engine rooms and lockers as well as other surfaces where a waterborne product is desirable.
Note
Due to its above average adhesion properties, ALEXSEAL Waterborne Topcoat may be applied directly to fiberglass. Drying time is highly dependent on proper airflow.